AN6 Universal Fuel Tank Return Line Fitting Kit
Aluminum
Allow you to add the threaded bung on the fuel tank to install a return line.
Easy installation. You only need to drill a 1/2'' hole without having to do any welding. The bung can be firmly seated by rotating the bolt with the wrench to collapse the bung and press against the inside of the tank.
Will work on material up to 1/4" thick.
O-ring included to prevent leakage
9/16"-18 to 6AN fitting
fuel return line fitting is designed for installing a return line port into a fuel tank when adding a fuel injection system. The installation is easy using standard hand tools, a drill and does not require access to the inside of the tank. It can be installed into any fuel tank with material thickness up to .250 inches. All you need to do is drill a 1/2 in. hole and insert the fitting from the outside of the tank, and compressing the aluminum body like a rivet with the supplied stainless steel bolt will provide a secure and leak-free seal.