HIGH QUALITY: This brake fluid tester adopts nickel-plated metal probe, oil and oxidation resistant, not easy to corrode. The housing is black frosted plastic, good anti-slip, the measurement is accurate to 1%, through the change of conductivity to determine the change of water in the brake fluid.
5 LED INDICATOR LIGHTS: The brake fluid tester has 5 kinds of LED indicator lights, which will show the percentage of water in the brake fluid by three colors, which can quickly check the health condition of the brake fluid in your car, provide you with more accurate test results and remind you to replace the brake fluid when necessary.
PRACTICAL: This brake fluid tester is suitable for most automobiles, easy to operate and suitable for testing the percentage of water in DOT-3, DOT-4, DOT-5.1 brake fluids. Extremely convenient for personal use, widely used in individual garages, repair shops, etc.
CONVENIENT AND EASY TO USE: This brake fluid tester is easy to use, press the button, insert the test pen, the indicator is accurate to 1%, and you can get the result in seconds. In order to save power, the test pen will automatically turn off the power after 20 seconds of use to save.
QUALITY SERVICE: This brake fluid fluid tester is suitable for testing the performance of DOT3, DOT4, DOT5.1 brake fluids, with accurate test results and fast measurement speed. Small size, light weight, easy to carry; If you have any questions about our products, please contact us in time, we will reply you within 24 hours.
Description
Indicator light meanings in detail:
Green: Battery OK, that is, the brake fluid does not contain water.
Green - yellow: the water content in the brake fluid is less than 1%, the brake fluid performance is good, can be used with confidence
Green - yellow - yellow: the water content in the brake fluid is about 2%, the brake fluid can continue to be used.
Green - yellow - yellow - red: the water content in the brake fluid is about 3%, it is recommended to replace the brake fluid.
Green-yellow-yellow-red-red: the water content in the brake fluid is at least 4%, it is necessary to change the brake fluid immediately.
Warm tips: After each test, use a dry cloth or paper to wipe the liquid part of the test point clean.
4PCS Car Exhaust Rubber Hanger, 2 Holes 11mm (0.43inch) Muffler Hanger, Universal Exhaust Insulator Muffler Hanger, Auto Muffler Shock Absorbent Bracket Mount
KWD 3.500
4PCS 1157 LED Bulb Socket Plug, Signal Light Socket Wiring Harness, Car Plastic Waterproof Turn Signal Tail Stop Rear Brake Light Base Harness Plugs Connector
KWD 3
Exhaust Hangers Rubber Muffler Hanger, 4 Holes 12mm (0.47inch) Universal Insulator Bushing Shock Absorber Bracket, Rubber Exhaust Hangers, Muffler Bracket Mount (4PCS)
KWD 3.500
1PC Offset Oxygen Sensor Socket, Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, 3/8-Inch Drive, 7/8-Inch (22mm), Suitable for Most Cars, Trucks
KWD 3
