."There has never been an easier way to convert your mSATA SSD into a standard 2.5" SATA III SSD. The SABRENT EC MSSA is the perfect solution to expand the connectivity of your mSATA drive in just a few easy steps! ● Completely pass through design allows for the mSATA drive to operate at full capacity without any conversion bottlenecks as well as provides power. ● Supports 50*30mm mSATA (Mini SATA) form factor Solid State Drives ● Aluminum enclosure provides added protection for your mSATA drive User instructions: The EC MSSA is a 2 part housing that interlocks and secures once your drive is inserted. With the housing apart: 1. Gently attach your mSATA drive into the housing and connect to the mSATA connector. (show picture of connectors) 2. Once secure, connect the 2 housing pieces (show the housing being put together) 3. Secure the housing with the supplied screws (show screwing the housing together) You are ready to go! Note: ● It doesn't support Mini PCIE SSD ● The product does not contain SSD hard disk Package Contents: ● mSATA to SATA 2.5 enclosure ● Screws + Screw Driver ● User manual " Plug & Play, Hot Swappable. Tool free design, easy to install. Hi Speed USB 3.0 to SATA interface. Compatible with 2.5” SATA hard drives. Optimized for SSD, Supports UASP SATA III. Supports 7mm/9.5mm thickness HDD. No driver needed. The SABRENT 2.5 Inch SATA to USB 3.0 Tool free Clear External Hard Drive Enclosure [Optimized For SSD, Support UASP SATA III] (EC OCUB) allows you to take advantage of the lightning speed of USB 3.0 to quickly transfer files up to 5 Gbps! Connect any 2.5” Serial ATA (SATA) or SATA II Hard Drive to your computer through an available USB 3.0 port on your desktop or laptop. By formatting this case with a drawer function, there is now extra protection for your hard drive. Reverse compatible with USB 2.0 and 1.1, this enclosure is a perfect solution for data transfers or data backup!