Waveshare 2PCS USB to LoRa Data Transfer Module, Based On SX1262, Suitable for Data Acquisition in Industry and Agriculture-TCXO Crystal oscillator-2PCS Version
All electronics ship with US style plugs.
You may need a voltage converter or a plug adapter.
Special Features
This is 2 PCS Version. USB-TO-LoRa-xF uses TCXO crystal oscillator and is recommended to be use in 0~85℃ temperature.
Adopts the original SX1262 chip, with -148dBm reception sensitivity and 22dBm emitt power
AES communication to ensure data transmission security. Supports multi-level relay networking to increase the wireless communication distance
Supports preamble detection, with CRC, automatic packetization, 960 bytes cache functions. Supports LBT sending, RSSI output, AT command configuration
Supports host configuration and firmware upgrade (support firmware customization for batch order). Comes with online development resources and manual.
Waveshare Compute Module 4 IO Board Pack with RPi Zero V1.3 Camera Cable 15 CM (No WiFi) Compatible with Raspberry Pi Compute Module 4
KWD 19 .500
Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as CM4, with Standard CM4 Socket, Raspberry Pi 40PIN GPIO, Gigabit Ethernet, USB2.0, DSI, CSI, HDMI, 3.5mm Audio Jack etc.
KWD 11 .500
Ethernet/USB HUB HAT Expansion Board for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W /2 W/Zero WH/2WH, with 1 RJ45 10/100M Ethernet Port, 3 USB Ports Compatible with USB2.0/1.1
KWD 6
waveshare 1.5inch RGB OLED Display Module 128x128 Pixels 16-bit High Color (65K Colors) with Embedded Controller Communicating via SPI Interface.
KWD 8 .500
{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}
{"email":"Please enter your email address","email_i":"Invalid email address"}
Copyright © Tilga 2025, all rights reserved.
Waveshare Compute Module 4 IO Board Pack with RPi Zero V1.3 Camera Cable 15 CM (No WiFi) Compatible with Raspberry Pi Compute Module 4
KWD 19.500
Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as CM4, with Standard CM4 Socket, Raspberry Pi 40PIN GPIO, Gigabit Ethernet, USB2.0, DSI, CSI, HDMI, 3.5mm Audio Jack etc.
KWD 11.500
Ethernet/USB HUB HAT Expansion Board for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W /2 W/Zero WH/2WH, with 1 RJ45 10/100M Ethernet Port, 3 USB Ports Compatible with USB2.0/1.1
KWD 6
waveshare 1.5inch RGB OLED Display Module 128x128 Pixels 16-bit High Color (65K Colors) with Embedded Controller Communicating via SPI Interface.
KWD 8.500
