RIIEYOCA OBD2 Power Cable for Dash Cam,USB-C to OBD-II Hardwire Adapter with Switch Button Connector Plug and Play 24 Hours Surveillance/Acc Mode (11.5FT/3.5M)
Easy to install: The cable simplifies the installation of the tachograph and can plug and play. And it can be hidden for beautiful wiring. You can use the switch to choose two different operating modes for the tachograph
ACC Mode ["O"]: The car ignites and starts the power supply, and the OBD2 line automatically stops the power supply after the car is turned off and delayed for 20 minutes. (Input: 12.8V-36V; output: 5V / 3A)
Monitor Mode [" - "]: 24H continue parking monitoring, power supply after the car is turned off until the car battery is lower than 11.6 V, the OBD line will automatically stop the power supply after a delay of 5 minutes. (Input: 11.6V-36V; Output: 5V / 3A)
Low voltage protection: The OBD2 line has a built-in MCU intelligent control chip, which can detect the car battery power in real time. When the car power drops to the low voltage protection value of the OBD line, the OBD line automatically enters the low voltage protection and turns off the output
Note: This OBD2 power cable is only suitable for fuel vehicles, please identify it carefully before purchase