GAF-USB: 802.3af Power over Ethernet PoE Splitter / Converter for 5 volt non-PoE devices. Extend power up to 328 feet away from a PoE switch. Features opto-isolated power to protect your devices. 5v 10w PoE splitter compatible with non-PoE Security Cameras, Tablets, Raspberry Pi, Smart Home Devices, Foscam, Dropcam, Sonoff PTZ cam. The 1.35mm x 3.5mm DC barrel fits most devices that use 5 volt power. This Power over Ethernet splitter converts and 'splits' 44-56v PoE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit data capability on its RJ45 connector. Requires an IEEE 802.3af PoE switch or 802.3af PoE Injector (sold separately). Functions as a PoE splitter for 5v devices while delivering lightning fast gigabit wired speeds on the RJ45 connector. GATS-10-8-51V120W: Power up to four IEEE 802.3at standard IP cameras, desktop phones, WiFi access points, or other low voltage devices over 300 feet from PoE source. Our plug and play 8 port PoE switch automatically detects devices. This device has two gigabit uplink ports and eight 10/100 Mbps ports. This 8 port power over ethernet switch can support up to eight 802.3af/at devices with 25.5 watts max power available from a single PoE+ port. Mix and match multiple devices, up to a total power budget of 120 watts. A PoE+ switch opens the door for you to add downstream node controllers, saving on network cabling. Increase your internet bandwidth with more WiFi Access Points. Operate modern PTZ security camera systems, and more. Versatile, high-speed unmanaged switch includes dual gigabit LAN uplink ports for redundancy. A simple toggle switch allows you to separate each port with its own VLAN, or extend the PoE range to over 800 feet.