Multi-functional LCD charging display, For battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR), charging capacity, voltage and current: 0.5A/1A/2A,Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V (IMR).Mode (Channel) Button: There are two independent buttons for each channel. When the power supply is connected and a battery is inserted, a short press of the channel button within 5 seconds changes the battery type.PD2 uses a high-definition LCD display,the display is very detailed.The display can show the battery type,battery voltage, charging percentage,charging history,charging time and charging current.
Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.
Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter, Two independent charging and micro computer management system.Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA),2000mA is fixed only for slot#2. Output current: Li-Ion/IMR/LiFePO4: 2000mA*1 (only for slot #2), 1000mA* 2, 500mA* 2 NiMH/NiCd: 500mA* 2. Long press the corresponding 1/2 slot to change the charging current of the battery.
Note:Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit,If DC input, only 12V 1A is recommended,Mind heating while charging,Remove the charger from power source after charging complete, and remove the battery from the charger at the same time.For indoor use only.