Search

Search

Home / TISEKER / Single Board Computers
TISEKER Mini Nano V3.0 ATmega328P Microcontroller Board with USB Cable for Arduino in Kuwait TISEKER Mini Nano V3.0 ATmega328P Microcontroller Board with USB Cable for Arduino in Kuwait TISEKER Mini Nano V3.0 ATmega328P Microcontroller Board with USB Cable for Arduino in Kuwait TISEKER Mini Nano V3.0 ATmega328P Microcontroller Board with USB Cable for Arduino in Kuwait TISEKER Mini Nano V3.0 ATmega328P Microcontroller Board with USB Cable for Arduino in Kuwait

Mini Nano V3.0 ATmega328P Microcontroller Board with USB Cable for Arduino

KWD 5
Brand
TISEKER
Weight
18 g
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • The Nano for arduino can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
  • The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality.
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version.
  • This board is using the chips ATmega328P and CH340, Support ISP download; Support USB download and Power. If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html

Description

Product description

Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino
Fully Compatible to Arduino Nano V3.0 ATmega328P-AU ATmega328 Microcontroller
Bootloader installed, ready to upload sketches from Arduino software Microcontroller ATmega328P-AU
Operating Voltage :5V
Input Voltage (recommended) 7V-12V
Input Voltage (limits) 6V-20V
Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 8
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader SRAM 2 KB
EEPROM 1 KB
Clock Speed 16 MHz
Dimention:Approx. 45x17x19mm
Cable Length:245mm

Drivers: directly from the chip manufacturer - WCH 340 product home page

http://www.wch.cn/product/CH340.html
http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver)
http://www.wch.cn/download/CH341SER_MAC_ZIP.html
http://www.wch-ic.com/download/list.asp?id=127 (windows)
http://bit.ly/2pMF4in
Note: Before running the procedure, pls install the corresponding computer system driver.

Package:
1 xNano V3.0 ATmega328P Arduino Compatible Board
1 xMini USB Cable

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}