3.7V 1100mAh LiPo Battery - 1S 1C Lithium Polymer Rechargeable Battery with JST 1.25 Connector, Protection Board and Insulated Rubber Tape for Arduino ESP32 Development Board (4 Pack)

✔【Application】These 3.7V 1100mAh LiPo batteries are perfect for Arduino or ESP32 projects when you don't have access to an AC power source. NOTE!!! The maximum operating current of this battery is only about 1.5A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current
✔【Reliable Performance】This 3.7 volt rechargeable battery provides reliable performance, no leakage and long cycle life. PCM protection function: overcharge, over discharge, over current, short circuit protection, over temperature protection
✔【1100mAh LiPo Battery】The recommended battery charging current is 0.2A, with a maximum of 1A. The recommended discharge current is 0.5A, the maximum is not more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V
✔【Battery Specifications】Dimensions: 52*30*7mm/ 2.05*1.18*0.27inch; Weight: 21g; Capacity: 1100mAh; Volt: 3.7V. Plug: JST 1.25; Discharge Rate: 1C. (PLEASE NOTE battery size, voltage and plug match)
✔【Storage & Usage】When storing lithium polymer batteries for a long time, please keep the battery in a state of 40%-60%. We recommend to charge the battery every 3 months after receipt of the battery and maintain the voltage 3.7-4.0V. Store battery in cool and dry place

Hello,