Search

Search

Boost Step up Power high Voltage Transformer 20kv Coil Module DC 3V-6V 700KV High Voltage Generator Super Arc Pulse Generator

KWD 2.500
KWD 2.500
Brand
Walfront
– 1 +

Special Features

  • Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.
  • The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(<1.5cm,1cm is OK). Otherwise, energy can not be released due to high voltage, easily damaged modules.
  • The module power, the internal is not easy for heat dissipation, so it can not work for a long time.
  • To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage when in the arc state.
  • Small capacity series lithium battery is 7.2 V, voltage will drop to about 4V when arcing, the smaller the capacity, the lower the voltage will become. It is recommended to use 2000MA lithium, it is better to choose 4000MA battery.

Description

Specifications:
Size: 55*24*22mm/2.17*0.94*0.87inch
Input voltage: 3V-6V
Input Current: 0.5A-2A(depending on the input voltage)
Input line length: about 10cm/3.94inch
High Voltage type: DC type
Output voltage: about 700KV (please pay attention to safety when used)
Output current: 0.5A
Output line length: about 10cm/3.94inch
High voltage poles ignition distance: ≤1.5cm(1.5cm is maximum distance, 1cm is better)

Note:
1.Input the power of 3-6v, output two levels of terminal can produce 1.5cm length high temperature arc, ignition paper, single high voltage line can also discharge of any metal body, working without a crack sound.
2.On the input power: 3.7-v lithium battery can be used in series, such as battery, idle cell phone battery (to remove the board, recommended capacity 2000mAh) or -/Nimh battery pack, 4V or 12V batteries(12V battery works best)

Package Included: 1 x High Voltage Pulse Generator

Note:
1.The power time is not 20 seconds each time. Since the output power is strong, it must be driven by rechargeable battery or storage battery. Improper voltage and long work will easily damage the high voltage module. Be careful when testing and using!
2. Ignite distance keep within 1cm, please

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}