- Shopping, made easy.
- /
- Get the app!
Waveshare POE HAT Board for Raspberry Pi 5, Power Over Ethernet HAT(POE) with Onboard Cooling Fan and Metal Heatsink, Supports 802.3af/at Network Standard,12V and 5V Power Outputs
KWD 12
Waveshare PCIe to M.2 Adapter for Raspberry Pi 5, Supports NVMe Drive Protocol Compatible with 2230/2242 Size M.2 Solid State Drive, High-Speed Reading/Writing, Gen2 and Gen3 Modes, HAT + Standard
KWD 5.500
for Raspberry Pi 5 Official Raspberry Pi 5 Active Cooler, Pi5 Active Cooler Combines Temperature-Controlled Blower Fan and Aluminium Heatsink, Comes with Thermal Tapes for Better Heat Dissipation
KWD 4.500
ESP32-S3 with 1.28inch Round LCD 240×240 Resolution ESP32 S3 Development Board with IPS Display, 32-bit LX7 Dual-Core Processor, GC9A01 Driver Chip, Supports WiFi/Bluetooth,Type-C Connector
KWD 10
Official CSI FPC Flexible Cable Compatible with Raspberry Pi 5, 22Pin to 15Pin, Suitable for CSI Camera Modules, 500MM/50CM/1.64 FT
KWD 4
Micro HDMI to HDMI Adapter Board for Raspberry Pi 5 / Raspberry Pi 4B, Dual 4K Outputs HDMI Female Multifunctional Connector Adapter Two Power Supply Methods-Type-C Port or Screw Terminal
KWD 5.500
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 5-Point Touch Screen IPS LCD 800×480, 32-Bit LX7 Dual-Core Processor Up to 240MHz, Support Wi-F-i & Bluetoo-th Onboard CAN RS485 I2C Ports
KWD 17
Waveshare 2inch LCD Display Module IPS Screen 240×320 Resolution, 262K Display Color Embedded ST7789VW Driver Chip SPI Interface Compatible with Raspberry Pi/with Arduino/STM32
KWD 6
Waveshare 1.83inch LCD Display Module Rounded Corners IPS LCD 240 x280 Resolution, 65K Display Colors SPI Interface Compatible with Raspberry Pi/with Arduino/STM32/ESP32, etc
KWD 6.500
Luckfox Pico Mini RV1103 Linux Micro Development Board, Integrate ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, Support MIPI CSI GPIO UART SPI I2C USB Interface Onboard 64MB Memory with 128MB Flash
KWD 6.500
SIM7028 NB-IoT HAT for Raspberry Pi 5/4B/3B+/2B/Zero/Zero 2W and Jetson Nano,Onboard 40PIN GPIO Header, Supports Global Band NB-IoT Communication with GSM Antenna Type-C Interface
KWD 9.500
Pi5 POE HAT Board for Raspberry Pi 5, Pi5 Power Over Ethernet HAT(POE) Supports IEEE 802.3af/at Network Standard, 5V 5A Output,Compatible with Raspberry Pi 5 Official Case
KWD 9.500
ESP32-C6 Microcontroller W-i-F-i Development Board Adopts ESP32-C6-WROOM-1-N8 Module Built-in 8MB Flash, Integrated W-i-F-i 6 Blue-Too-th 5 and and IEEE 802.15.4, Support USB and UART Development
KWD 5
Waveshare 4-Ch RS485 to RJ45 Ethernet Serial Server, 4 Channels RS485 Independent Operation, Rail-Mount Industrial Isolated Serial Module, Bi-Directional Transparent Transmission, Modbus Gateway
KWD 23
ESP32-C6 Microcontroller, W-iF-i 6/Blue-Too-th 5 and IEEE 802.15.4 Development Board, Adopts ESP32-C6-MINI-1 Chip 160MHz RISC-V 32-Bit Single-Core Processor Supports Raspberry Pi Pico Expansion Board
KWD 3.500
SIM7670G LTE Cat-1/GNSS HAT Board for Raspberry Pi 5/ 4B/ 3B+/3B/ Zero W/Zero 2W, Support Global Multi-Band LTE 4G Cat-1/ GNSS Positioning/Dial-up on Windows/Linux/, with 3X USB 2.0 Extended Ports
KWD 22
PCIe to M.2 Mini Adapter for Raspberry Pi 5, Support NVMe Protocol M.2 Solid State Drive, Compatible with 2230/2242 M.2 SSD Support Gen2 and Gen3 Modes, Support Booting PI5 from Solid State Drive
KWD 5.500
Industrial Isolated USB to 4-Ch RS485 Converter with CH344L Chip, Multi Protection Circuits, Wall-Mount & Rail-Mount Support, Compatible with Linux, Android, Windows 11/10 / 8.1/8 / 7, etc.
KWD 10.500
Luckfox Pico Mini RV1103 Linux Micro Development Board with Pre-Soldered Header, ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, Supports MIPI CSI GPIO UART SPI I2C USB Interface (Without Flash)
KWD 5.500
Luckfox Pico Max Linux Micro Development Board with Pre-Soldered Header RV1106G3 Chip, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, with Rich Interfaces-256MB Memory
KWD 7.500
DSI FPC Flexible Cable for Raspberry Pi 5, DSI Cable for Connecting DSI Display Screens with Raspberry Pi 5, 22Pin to 15Pin, Cable Length 50CM
KWD 3.500
1.28inch Round Touch LCD 240×240 IPS Screen Display Module,SPI and I2C Communication,with GC9A01 Display Driver,CST816S Touch Driver,for Raspberry Pi 5/ 4B/3B+/Pi3B/Zero W for Raspberry Pi Pico,etc
KWD 8
Industrial USB to TTL Converter 6pin Serial Cable 1M Length, Original FT232RNL Chip Hardware Flow Control, 300bps ~ 3Mbps Data Rate Compatible with Win7/8/8.1/10/11, Linux, Android,etc
KWD 6
Pico 2 W with Color Coded Pre-Soldered Header Compatible with Raspberry Pi Pico 2 W Board+ USB Cable, 2.4GHz 802.11n WiFi and Bluetooth 5.2, RP2350 Chip Dual-Core& Dual-Architecture Design
KWD 7
Pi 5 PCIe to M.2 HAT with PoE Function Adapter Board Compatible with Raspberry Pi 5, Combination of PoE and PCIE to M.2 for Pi5, Supports NVMe 2230/2242 / 2260/2280 Size M.2 Solid State Drive
KWD 13
ESP32-S3 Ethernet Development Board, 10/100Mbps RJ45 Ethernet Port, Support W-i-Fi & BLE, Ethernet Communication, 240MHz Dual Core Processor, Onboard Type-C Port and TF Card Slot, with PoE Module
KWD 12
0.71inch Round LCD Display Module Compatible with Raspberry Pi Pico/Pico 2/Pico 2 W/ ESP32, 160×160 Resolution,IPS Display Panel, SPI Interface, 65K Colors
KWD 7.500
Pico Plus RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, with Ethernet Port, 64MB DDR2, Support GPIO UART SPI I2C USB CSI Camera Interfaces
KWD 5.500
ESP32-S3 Mini Development Board Tiny Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency,Integrated 2.4GHz W-i-F-i and Blue-Too-th LE Dual-Mode Wire-Less Communication
KWD 5
2PCS RP2040-Zero Pico-Like MCU Board Based on Raspberry Pi Microcontroller RP2040, Dual-Core Arm Cortex M0+ Processor Flexible Clock Running up to 133 MHz, 29xGPIO Pins Support C/C++, MicroPython
KWD 6.500
ESP32-S3 Ethernet Development Board, 10/100Mbps RJ45 Ethernet Port, Support W-i-Fi & BLE, Ethernet Communication, 240MHz Dual Core Processor, Onboard Type-C Port and TF Card Slot, Only Board
KWD 10.500
1.5inch RGB OLED Display Module 128×128 Pixels, 65K RGB Display Colors, SPI Interface Compatible with Raspberry Pi 5/ Pi 4B/ Pi 3B+ Pi3B/ Pi Zero/Pi Zero 2W/Arduino/STM32, etc.
KWD 9.500
