gliship Solder Seal Wire ConnectorsCan't imagine how a small connector can make a big difference? Is it worth buying such an expensive little part?
gliship solder seal connectors are an irreplaceable tool for fast, reliable, and effective wire connection in any place. It will make your wire connection waterproof just in seconds; also apply some mechanical damage protection and prevent wire corrosion!
Function
Puncture-resistant
Evenly Shrinking
Waterproof
Heat-resistant
Resistant to abrasion
Resistant to stretch
Resistant to vibration
How to use it？
1. Strip wire insulation with a proper length and insert wires into the solder sleeve of proper size.
2. Twist the conductor together and move the connector to the middle of the conductor.
3. Evenly heat by a heat gun (better with reflector nozzle) until it melts.
NOTE: NO CRIMING NEEDED! For better results, use a heat gun.

Temperature that starts to shrink: 80℃
Temperature that solder ring starts to melt: 111℃
Temperature that solder ring melts completely：138℃
Note: We suggest the temperature that the hot air gun should set about:400-600℃ (752-1112°F)

what you will get？
The connector assortment includes white (AWG 26 – 24), red (AWG 22 – 18), green(AWG 18 – 16), blue (AWG 16 – 14), and yellow (AWG 12 – 10) solder seal connectors that can be used on wire AWG from 26 to 10.