Name: TB6612 DC stepper motor servo drive module
Size: 68mm*53mm*20mm/2.68in*2.09in*0.79in
Weight: 26g/0.92oz
Power supply voltage: 8-35V
Logic voltage: 5~12V
Reference voltage: 5.5V
Output on-resistance: 320-430M ohms per driver
Diode forward voltage: 1.2V per driver
Output current of the driver: ±2A
Application: Motor/Stepper/Servo Shield v2
Product Introduction:
Fully compatible with the extension of the Arduino interface.
Arduino communication can be modified via 12C and address.
The module can be connected to two motors, PWM drive direct output, up to four DC brush motors or two four-wire stepper motors.
Uses TB6612FNG motor driver chip, 1.2A drive capability, peak 3.2A.
It also has a lower motor voltage drop, so you can get more torque from the battery.
Instead of using latches and Arduinos PWM pins, the module has a comprehensive dedicated PWM driver on the chip
Actuator, the chip handles all the motors and speed control on the I2C, and only two pins are needed to drive multiple motors(SDA and SCL), stackable design.