مميزات خاصة

[High Performance] Broadband, Low power, Low Noise. Good flatness in the 1-6 GHz range. Gain: 20dB, OP1dB: 18dBm Typ. Can be used to replace TQP3M9035, QPL9058, TQP3M9037, QPL9547 modules
[USB Interface Powered] The ZK05-BM is a USB-powered RF low noise amplifier. Based on the ZKxx-UM, ZK05-BM adds a battery and reduces power consumption, making it suitable for portable use
[Built-in Battery] Built-in 300mAh battery, it has a flatter and more consistent gain, lower noise figure, smaller size, and longer battery life (Charging 210mA, Total 230mA, Battery life 12 hours)
[Application] Recommended for use as tinySA ULTRA 5.8GHz preamplifier. Since the LNA in tinySA ULTRA is effective only below 3.5GHz, adding an LNA can enhance high-frequency sensitivity. ZK05-BM is helpful for users requiring measurements at 5.8GHz
[Note] Unless specifically requested, please avoid using both the built-in LNA and external LNA of tinySA ULTRA at the same time. It is not recommended to employ a preamplifier in an environment with intense background noise. This might clog the receiver or cause the AGC circuit of the receiver to lower the reception gain

وصف

ZKxx-BM Series - USB Powered RF Low Noise Amplifier
The ZK05-BM Low Noice Amplifier is a USB-powered RF low noise amplifier with built-in battery introduced by Zeenko. Based on the ZKxx-UM, it adds a battery and reduces power consumption, making it suitable for portable use. It has a flatter and more consistent gain, lower noise figure, smaller size, and longer battery life.

Specifications:
1. Item Type: LNA Low Noice Amplifier
2. Module Frequency Range: 10M-6GHz (Good flatness in the 1-6 GHz range)
3. Gain: 20dB
4. OP1dB: 18dBm Typ
5. Built-in 300mAh battery (Battery life: 12 hours)
6. Supply Current: Charging 210mA, Total 230mA
7. Recommended for use as tinySA ULTRA 5.8GHz preamplifier
8. Can be Used to Replace TQP3M9035, QPL9058, TQP3M9037, QPL9547 Modules

Package List:
1x ZK05-BM LNA Modules 1x USB Cable

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه