Search

Search

Home / AURSINC / Home Theater
-6%
AURSINC ZK06-UM Low Noise Amplifier (LNA) Module, Broadband, 10M‑6GHz, 21dB Gain, USB Interface Powered, Used for TinySA Ultra 5.8GHz Preamplifier, for RF & Software Defined Radio (SDR) in Kuwait AURSINC ZK06-UM Low Noise Amplifier (LNA) Module, Broadband, 10M‑6GHz, 21dB Gain, USB Interface Powered, Used for TinySA Ultra 5.8GHz Preamplifier, for RF & Software Defined Radio (SDR) in Kuwait

AURSINC ZK06-UM Low Noise Amplifier (LNA) Module, Broadband, 10M‑6GHz, 21dB Gain, USB Interface Powered, Used for TinySA ULTRA 5.8GHz Preamplifier, for RF & Software Defined Radio (SDR)

KWD 7.500
KWD 8
Brand
AURSINC
Category
Home Theater
Weight
16 g
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • [High Performance] Broadband, Low noise, Good flatness in the 1-6 GHz range. Gain: 21dB, OP1dB: 18dBm Typ. Supply Current: 80mA Off-chip bias, user can adjust the bias resistor to reduce the current
  • [USB Interface Powered] ZK06-UM is USB interface powered RF low noise amplifier with convenient power supply interface, moderate gain, high IP3 and low noise. Can be used to replace QPL9503, QPL9504 modules
  • [Reduce Noise Floor] Powered by USB type-C interface, and the built-in high PSRR LDO can effectively reduce the power noise, which effectively reduces the noise floor compared with other vendor's USB direct-feed modules
  • [Application] Recommended for use as tinySA ULTRA 5.8GHz preamplifier. Since the LNA in tinySA ULTRA is effective only below 3.5GHz, adding an LNA can enhance high-frequency sensitivity. ZK06-UM is helpful for users requiring measurements at 5.8GHz
  • [Note 1]Unless specifically requested, please avoid using both the built-in LNA and external LNA of tinySA ULTRA at the same time
  • [Note] The ZK06-UM LNA module has a very compact design and uses a system shield case, which may rust if exposed to moisture. Please pay attention to moisture protection when using outdoors

Description

ZKxx-UM Series - USB Interface Powered RF Low Noise Amplifier
The ZK06-UM LNA Modules is USB interface powered RF low noise amplifier with convenient power supply interface, moderate gain, high IP3 and low noise.
The ZK06-UM is powered by USB type-C interface, and the built-in high PSRR LDO can effectively reduce the power noise, which effectively reduces the noise floor compared with other vendor's USB direct-feed modules.

Specifications:
1. Item Type: LNA Low Noice Amplifier
2. Module Frequency Range: 10M-6GHz (Good flatness in the 1-6 GHz range)
3. Gain: 21dB
4. OP1dB: 18dBm Typ
5. Power Supply: USB Interface Type-C
6. Supply Current: 80mA Off-chip bias, user can adjust the bias resistor to reduce the current
7. Recommended for use as tinySA ULTRA 5.8GHz preamplifier
8. Can be used to replace QPL9503, QPL9504 modules

Package List:
1x ZK06-UM LNA Modules 1x USB Cable

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}