Note: The connection head of this adator cable has an inner hole diameter of 5mm/0.2″,please check the size chart picture carefully in this product listing before making order. We will not take the responsiblity if it does not fit your lithium jump starter.

Specifications:
- Support up to: 18000mAh Power bank at 400Amp Current (- Input: 12V
- Operating temperature: 0°C-60°C
- Wire Guage: 10 AWG; RED (+) 8" length; BLACK (-) 5" length
- Strong Alligator Clamp Clip with EC5 Plug Connector (Fit for most car jump portable starters)

Usage of Car Jump Starter:

Red to Postive(+),Black to Negative(-). You'd better connect the clamps to the vehicle battery first, and then plug the clamp EC5 into the socket of the jump starter and then start the vehicle.

Cautions:

1.Only applies to 12V 4.0-liter gasoline vehicle or less.
2. Do not try to boost if the power of jump starter is low, don't crack several times if your first boost is failed. Stop trying, charge your jump starter and try again after some time.The constant crank will cause overheat and will damage the clamp
3. Do remove the product from the vehicle within 30 seconds after the vehicle started.
4.Charge your jump starter more than 5 hours and less than 8 hours every time before use because its LED indicator power button is not always accurate.
5.This clamp is just a connection accessory, we do not make sure successful boost, we shoulder no responsibility from the poor performance of your car jump starter and your wrong operation method

XINCOL SM600 do not have anti-reverse protection if you want to find clamps with full protections please try XINCOL SM901

Package: 1 * XINCOL SM600 Jumper Cable with Battery Clamps