Rotating screw and lightweight design allows you to operate easily fine-tuned, fast wheel threading axle, tire mounting time can be shortened from ten minutes to 2-3 minutes, regardless of the size of the tire, one person can easily operate the tire removal and mounting.

Product Name: Motorcycle jack stand
Includes: Motorcycle jack stand*1, Bolt*1

How to Use:
1.Place the motorcycle on a flat surface and jack up the motorcycle so that the tires are off the ground
2.Place the motorcycle rear stand next to the motorcycle and adjust the height of the carrier to fit the height of the motorcycle tires
3.Place the motorcycle stands under the tire and make sure the tire is secure on the carrier
4.To remove the old tire, loosen the bolts and nuts on the tire with a wrench and remove the tire from the motorcycle, the tire will fall on the motorcycle chock for easy removal
5.Install the new tire, place the new tire on the motorcycle lifts and move it under the motorcycle, adjust the proper height by adjusting the swivel bolt, install the motorcycle tire and tighten the bolt and nut

Precautions:
1.When removing or mounting the tire, please operate carefully to avoid damaging the tire and wheel
2.When lifting the motorcycle with motorcycle jack, make sure the jack is positioned correctly to avoid tilting or collapsing the motorcycle
3.Motorcycle wheel stand are used to assist in changing motorcycle tires and are recommended for use with motorcycle fixed lifting tools
4.Please understand that the size is slightly inaccurate due to manual measurement