User Instructions:
1. Fill the empty bottle with your favorite essential oil.
2. Place the essential oil inhaler flat on the table (with holes facing upwards).
3. Use the dropper to suck up some oil from the bottle.
4. Drip 1-2 drops of oil into each of the holes of the essential oil inhaler (For customers who purchased the four-hole inhalers, please drip one hole on each side for a softer scent, and two on each side for a stronger scent).
5. If the hole is filled too full, please wait for about 5-10 minutes to let the rattan soak up all the oil before wearing it (till the essential oil inhaler doesn't look oily from the surface), or using a tissue to absorb the remaining oil on the surface, this can prevent skin irritation from direct skin contact with too much oil.
6. With the holes facing upwards, pull the inhaler slightly apart with your fingers and place it between your nostrils firmly, and adjust it to the correct position.
7. Cleaning - If the bamboo reed does not absorb the oil well after refilling it about 10 times, please soak the inhaler in 75% alcohol for about 12-24 hours. The alcohol will dissolve the clogging materials as well as cleansing the product. Dry the inhaler with a tissue or cloth. Then, leave it to dry for about 1-2 hours.
Notice :
1. Make sure to scan the QR code inside to read the user's instructions.
2. Don't pull the steel strip out, this process can be irreversible.
3. When not carrying it with you, please place the inhaler and dropper in open-air circumstances and stand the bottle upwards.
4. People with longer nostril hair may feel irritation when wearing the inhaler, if this occurs, it is advised to trim some of the hair.
6. Cleaning - Soak the inhaler in 75% alcohol for about 12-24 hours. The alcohol will dissolve the clogging materials as well as cleansing the product. Dry the inhaler with a tissue or cloth. Then, leave it to dry for about 1-2 hours.
* Be sure to read the precautions and safety guidelines of the essential oils you used.
Contents:
1. Silicone Nasal Inhaler x 3.
2. Silicone Dropper x 1.
3. Empty 2ml Bottle x 1.