Sewing Attachment for Low Shank vertical needle sewing machines. Overlock Cutting & Sewing Attachment compatible with models that have zigzag width of 5mm.
Overlock Cutting & Sewing Attachment works with Brother, Janome, Singer, Baby Lock, New Home, Kenssew, Juki, Simplicity, Necchi that are low shank vertical needle.
Achieve clean-cut edges as machine sews or performs satin stitches Creates the perfect cut edge like a serger or overlock. Selecting a stitch designated for the Side Cutter allows you to create a beautiful finish without any adjustment on stitch settings.
1. Make a cut about 2 cm (3/4'') long in the seam line of the fabric.
2. Select a stitch, and adjust settings as needed.
3. Place the cut right section on the top of the foot guide plate.
4. Slip the left side under the presser foot.
5. Lower the presser foot and guide the fabric through the presser foot as it stitches. THE SIDE CUTTER II IS NOT COMPATIBLE WITH HIGH SHANK MACHINES OR TOY MACHINES.