Elxjar Ni-MH Balance Charger works great for any 4.8V, 6.0V, 7.2V, 8.4V, 9.6V, 10.8V and 12V NiMH/NiCAD battery packs in RC cars, RC airplanes, RC helicopters, RC trucks, RC tanks, RC boats and airsoft that use a standard Tamiya. (Note: This charger only charge for NiMH/NiCAD batteries, do not charge for LiPo batteries.)
Package Included: 2 x Battery Pack [Rechargeable], and 1 x Elxjar Balance Charger. Two-Year Warranty, Our Goal is to Keep Our Customers Beyond Satisfied.
Voltage: 8.4 Volts, Capacity: 3000mAh, Chemistry: Ni-MH, Connector: XT60, 0.4" of Wire Length, Silicone-Jacketed 14AWG Wire Dimensions: L 5.33 " (135.4mm) x W 1.79 " (45.5mm) x H 0.88 " (22.4mm), Weight: 11.99 oz(340g)
for 1/10 Brushed Radio Control Boats, 2WD and 4WD Cars, Trucks & Buggies

Fully recharge your new battery pack when you first receive it.

Do not over-discharge the battery, stop using it when you notice a drop in performance.

Do not over-charge the battery, remove the battery from charger when you are done recharging.

Heat lowers battery life, do not charge or discharge the battery when it's hot.

Always let the batteries cool down to room temp before using it/charging it.

Do not store the battery with low voltage, recharge after each use to avoid over-discharge.

Always store the battery in a dry and cool place, never expose it to heat or direct sunlight.

Recharge the battery once every 6-month, if they will be unused or stored long term.

Hello,

Search