Fitment

Compatible with Hyundai models
For 2017-2021 Hyundai Elantra
For 2023 Hyundai Elantra
For 2018-2021 Hyundai Elantra GT
For 2016-2021 Hyundai Loniq
For 2021-2023 Hyundai Loniq 5
For 2018-2023 Hyundai Kona
For 2022-2023 Hyundai Santa Cruz
For 2018-2019 Hyundai Santa Fe Sport
For 2020-2022 Hyundai Sonata
For 2022-2023 Hyundai Tucson
For 2019-2022 Hyundai Veloster
For 2020-2022 Hyundai Venue

Compatible with Kia models
For 2017-2021 Kia Cadenza
For 2022-2023 Kia Carnival
For 2021-2023 Kia K5
For 2017-2022 Kia Niro
For 2016-2021 Kia Optima
For 2021-2023 Kia Seltos
For 2018-2022 Kia Sorento
For 2020-2022 Kia Soul
For 2016 Kia Sportage (433 MHZ only)
For 2017-2022 Kia Sportage

Compatible with Genesis models
For 2021-2023 Genesis G80
2017-2022 Genesis G90
2022-2023 Genesis GV70

Auto Relearn:
Set tyre pressure
Start the engine
On dashboard, set the system into the relearn mode
Drive until the relearn is completed

Manual Relearn:
Engage parking brake and inflate all tires
set vehicle into the relearn mode
Use tool to activate the Left Front sensor
Repeat for RF/RR/LR tires
After activate for sensor. Relearn complete, the dashboard will show the info
Relearn Procedure
OBDII connector is required
Confirm TPMS sensors are properly installed
Adjust tire pressures to placard value
Activate TPMS Tool on left front tire sidewall next to the valve stem
Repeat for RF/RR/LR tires (Spare)if required
Apply OBD connector to DLC
Turn ignition to ON, Press OK on TPMS Tool to transfer data to ECU
Disconnect OBD connector from DLC
Turn ignition to OFF then ON
Drive at 12 mph for up to 5 minutes

Tips:
This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool
Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID, Pressure, Frequency