All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Application: the MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100 thousands of ohm meter) rail-to-rail output; Quiescent power supply current: less than 24 microamp; Gain bandwidth: 600kHz
20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
Easy to use: connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply)
Power supply noise rejection function: the amplifier has good power supply noise rejection
Description
10 Pieces Electret Microphone Amplifier Adjustable MAX4466 Module Microphone Preamplifier Blue Breakout Board Compatible with Arduino
XH-A105 5.0 TDA7498 Digital Amplifier Board 2 x 100 W Stereo Audio AMP Module Support TF Card
KWD 7.500
YEGAFE 2Pcs TDA7388 Audio Integrated Circuit Amplifier IC Quad Fully Compatible TDA7383 TTDA7386 TDA7384 TDA7381
KWD 6.500
2 Pieces Audio Amplifier Board Pam8406 Mini Amplifier Board 5v, 5w+5w Amplifier Module, Digital Power Module Class D 2.0 Dual Channel Audio Stereo Amplify Board for DIY Sound System
KWD 6.500
6 Pieces Electret Microphone Amplifier Module MAX4466 Adjustable Gain Blue Breakout Board
KWD 4.500
