Features
1. Support to induce 5V, 9V, 12V, 15V, 20V voltage.
2. Fast charge support protocol: PD2.0/PD3.0, QC2.0/QC3.0, AFC.
3. Support voltage: 5V, 9V, 12V, 15V, 20V (voltage step is not supported).
4. Voltage adjustment method: According to the table on the back of the board, adjust the DIP switch to control the voltage output.

Note:
1. After adjusting the DIP switch, since there is no voltage indicator, it is recommended to use a multimeter to measure the voltage before connecting to the application circuit.
2. If the DIP switch is not adjusted according to the table, the module will output any one of the above voltages.

Package Includes:
4 x Fast charge decoy trigger module
1 x 26AWG red and black cable 50 cm each