How to use:
1. Connect the finder to the receiver's LNB and antenna.
2. Adjust the knob on the front panel of the finder so that the pointer on the dial points to the "5" position.
3. Adjust the antenna azimuth and altitude angle, when the finder pointer points to the maximum deflection angle, adjust the front panel adjustment knob counterclockwise to partially attenuate the received signal, adjust the antenna azimuth, altitude angle, and LNB polarization angle, until the finder pointer stops increasing.
4. The satellite receiver is used to determine if the signal is the desired star signal. If so, remove the viewfinder and reconnect the receiver to the LNB. if the received signal is not the desired star signal, repeat the above.

Specification:
Item Type: Digital Satellite Finder
Material: ABS
Color: Black
Frequency range: 950-2150 MHz
Power supply: DC 13-18 V
Maximum input level: - 10dBm
Minimum input level: - 40dBm
Package List:
1x Digital Satellite Finder
2 x Interface Dust Cover