【New Etching Technique】This build plate uses etching technology and can be printed on both sides. The combination of honeycomb pattern on one side and square pattern on the other brings a new printing experience to your 3D printing. The entire printed panel is very textured and beautiful.Its surface material is upgraded PEI,which has strong adhesion. Compared with other holographic pattern films such as PEO/PET/PEI, this build plate has a longer service life and no problem of film peeling off.
【Made of 0.5mm thick spring steel plate】The build plate is made of high-strength 0.5mm spring steel plate, which has good flatness and elasticity. It's not easy to deformation after repeating bending. Just wait for the model to cool down and easily remove it without the need for any other tools
【How to get excellent adhesion】The surface of the build plate can withstand high temperatures of 200 ° C. The excellent adhesion base on selecting "Textured PEI Plate" on your slice and clean up the build plate before each using. Beside,We recommend these filaments and temperature for your building board: TPU: 30-35 ℃; PLA:40-65℃； PETG:50~80℃； ABS: 80~120 ℃ ", ASA: 80~120 ° C.
【Parameter Suggestion】After leveling the platform, adjust the distance between the nozzle and the first layer of the hot bed to 0.1~0.2mm. It is recommended that the first layer of the model slice be set to 0.2mm.First layer speed is recommended 10~50mm/s. Print ABS, PETG class close blowing fan at first 3 floors. Close the blowing fan at the first floor when you print PLA. Depending on the recommended parameters for your consumables, it is recommended that the nozzle temperature of the first layer be 10 ° C higher than that of the other layers.
【 Attention and How to clean】 Our double-sided texture build plate is suitable for 3D printers with a platform size of 184X184mm and is compatible with Bambu Lab A1Mini. Please confirm your printer type before purchasing. It is particularly important to note:Do not use "acidic, alkaline"cleaners to wash (such as soap, washing powder, washing liquid, dish soap, etc.), scrub with alcohol only before and after long-term use. Dry after scrubbing.
Description
Sahvaim 184x184mm Double Sided Flexible PEI Honeycomb Sheet, Smooth PEI Honeycomb Surface for Bambu Lab A1 Mini 3D Printer, 3D Printer PEI Plate Removable Platform.
Imdinnogo Newest 3D Printer Direct Drive Extruder Pattern Basic Parts Gear Kit Replacement Great DIY Player Directly Most Extruder Compatible with Trianglb BM Tev Tornd Ender 3 CR10 CR10S TL-D3 Pro
KWD 8.500
Dream Mat 6X16 Combo
KWD 16.500
6Pcs 1.5M/4.9ft Stepper Motor Cables XH2.54-4P to XH2.0-6P Color Wire Stepper Motor Wires for 3D Printer
KWD 4
2-Pack Upgrade 6x15MM 24V 65W V6 Hotend High Temperature Heater Cartridge Element Compatible with VORON V2.4 V0.1 V1.8 3D Printer, Dragonfly BMS BMO Hotend/Dragon Hotend
KWD 4.500
