Product: One Channel 5V Relay Module adopts patch photocoupler isolation, strong driving ability, anti-interference ability strong and stable performance.The maximum load of the normally open interface: AC 250V/10A, DC 30V/10A.
Instructions for use: Power supply of the module: the power supply should be DC, the voltage should be consistent with the voltage of the relay, the common terminal of the relay, normally open, normally closed, is just a single-pole double-throw switch.
Interface introduction: VCC: connect to the positive pole of the 5V power supply (power supply according to the relay voltage), GND: connect to the negative pole of the 5V power supply, IN: the signal trigger terminal of the relay module (low level trigger is valid).
Application: This module complies with international safety standards, and there is an isolation slot between the control area and the load area; it can be used as a single-chip development board module or as a home appliance control.
Package includes: You will get 5 x 5V 1 Channel Relay Module, 1 x 15pin Female to Male Dupont Cable.
وصف
Electrical parameters:
Voltage version: 5V
Quiescent current: 4mA
Working current: 65mA
Trigger voltage: 0-1.2V
Trigger current: 2mA
Instructions on high-level and low-level triggering methods:
High-level triggering refers to a triggering method in which there is a voltage between the signal input terminal and the ground, which can be understood as a short-circuit triggering method between the signal input terminal and the positive pole of VCC;
Low-level triggering refers to the triggering method in which the voltage between the signal input terminal and the ground is OV, which can be understood as a method of short-circuit triggering between the signal input terminal and the negative pole of GN
Package includes:
5 x 5V 1 Channel Relay Module
1 x 15pin Female to Male Dupont Cable