مميزات خاصة

MCU: ESP32-S2FN4R2, X-ten-sa 32 bit LX7 Single-Coreup to 240MHz; onboard 128 KB ROM, 320 KB SRAM, 4 MB FLASH ROM, 2 MB PSRAM.
Wireless connections：BPI Bit S2 single board computer support WIFI: 1EEE 802.11 b/g/n , 2.4Ghz; 5x5 RGB LED matrix.
Interface: 1x buzzer, 1x thermistor sensor，2 x photosensitive sensors，2 x programmable keys, 1x BOOT key, 1x Reset key，1xType-C USB interface.
Micro-Bit: The Goldfinger Edge Connector definition is fully compatible with Micro: Bit.lO is compatible with micro:bit and can use most peripheral accessories of micro:bit.
System：BPI Bit S2 IoT development board Supports Web-dui-no, A-r-d-u-i-n-o, MicroPython & CircuitPython programming environments, suitable for STEAM education.
WIKI: https://wiki.banana-pi.org/BPI-Bit-S2. Any after-sales problems, please contact us by click WayPonDEV store and ask a question or leave the message in our forum by "forum.youyeetoo .com /".

وصف

-Specification-
MCU: ESP32-S2FN4R2，X-ten-sa 32 bit LX7 Single-Core Processer
Frequency: 240MHz MAX
operating temperature: -40℃~+85℃
ROM: 128 KB
SRAM: 320 KB
FLASH ROM: 4 MB
PSRAM: 2 MB
WIFI: IEEE 802.11 b/g/n ，2.4Ghz
GPIO：19 available GPIO pins have been introduced
Peripheral functions：ADC,TOUCH,PWM,SPI,I2C,I2S,Pulse counter, RMT,TWAI Controller,SD/MMC,LCD_CAMERA
External crystal：40Mhz
Buzzer：8.5x8.5mm buzzer
LED：25 WS2812 rgb LED, single line GPIO control; 1 monochrome LED, controlled by GPIO0
Photosensitive sensor：2 photosensitive sensor
Thermistor sensor：1 thermistor sensor
IO：19 pins Goldfinger IO,19 pins contacts on the back
Key 2 programmable keys,1 BOOT key,1 Reset key
USB：USB Type-C interface，full speed USB OTG,USB-ACM
Operating voltage：3.3V
Power：USB Type-C input 5V，or Goldfinger IO input 3.3V power supply
Size ：5 * 5 cm

مرحبًا،

بحث

لوحة تطوير Banana Pi BPI Bit S2 IoT، كمبيوتر لوحي واحد، 32 بت 240 ميجا هرتز ESP32-S2FN4R2 MCU، مع 128 كيلو بايت ROM، 320 كيلو بايت SRAM، واي فاي، بلوتوث لتعليم STEAM، دعم MicroPython CircuitPython

مميزات خاصة

وصف

منتجات شبيهه