Official Pi PCIe to M.2 HAT for Raspberry Pi 5, HAT + Standard, Comes with RPi 5 Active Cooler, Supports NVMe Protocol M.2 Solid State Drive 2230/2242 High-Speed Reading/Writing
All electronics ship with US style plugs.
You may need a voltage converter or a plug adapter.
Special Features
Official Pi PCIe To M.2 HAT for Raspberry Pi 5, HAT + Standard, High-Speed Reading/Writing, Supports NVMe Protocol M.2 Solid State Drive
Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive
Onboard Dual LED Indicators. Easy to monitor the Working Status
Onboard EEPROM
This kit comes with Official Pi PCIe To M.2 HAT and with Raspberry Pi 5 Active Cooler
RP2040 Microcontroller Development Board with 1.69inch Touch Round LCD 240x280, Based on Pi RP2040, Dual-core Arm Processor, 16MB Flash,Accelerometer and Gyroscope Sensor, Type-C Connector
KWD 12
PCIe to M.2 Adapter with PoE Function Compatible with Raspberry Pi 5, Pi 5 POE HAT M.2-M-Key HAT+ Supports NVMe Protocol M.2 SSD 2230/2242, IEEE 802.3af/at Network Standard with Metal Heatsink
KWD 13
Compatible with Raspberry Pi Pico 2 Microcontroller Board, with Yellow Pre-Soldered Header, Based on Official RP2350 Chip, Dual-Core & Dual-Architecture Design 4MB Flash, 3 Items
KWD 5 .500
Luck-Fox Pico Plus RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors with Ethernet Port, 64MB DDR2, 0.5TOPS, Supports int4, int8 and int16 NPU
KWD 7 .500
{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}
{"email":"Please enter your email address","email_i":"Invalid email address"}
Copyright © Tilga 2025, all rights reserved.
RP2040 Microcontroller Development Board with 1.69inch Touch Round LCD 240x280, Based on Pi RP2040, Dual-core Arm Processor, 16MB Flash,Accelerometer and Gyroscope Sensor, Type-C Connector
KWD 12
PCIe to M.2 Adapter with PoE Function Compatible with Raspberry Pi 5, Pi 5 POE HAT M.2-M-Key HAT+ Supports NVMe Protocol M.2 SSD 2230/2242, IEEE 802.3af/at Network Standard with Metal Heatsink
KWD 13
Compatible with Raspberry Pi Pico 2 Microcontroller Board, with Yellow Pre-Soldered Header, Based on Official RP2350 Chip, Dual-Core & Dual-Architecture Design 4MB Flash, 3 Items
KWD 5.500
Luck-Fox Pico Plus RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors with Ethernet Port, 64MB DDR2, 0.5TOPS, Supports int4, int8 and int16 NPU
KWD 7.500
