بحث

بيت / Usmile / أجهزة الكمبيوتر ذات اللوحة الواحدة
لوحة AP_PERIPH CAN Node L431، تحويل الأجهزة الطرفية المدعومة من ArduPilot GNSS والبوصلة والمقياس ومستشعر السرعة الجوية والأجهزة الطرفية القائمة على GPIO (PWM، Buzzer/LED) إلى الأجهزة الطرفية لحافلة DroneCAN in Kuwait لوحة AP_PERIPH CAN Node L431، تحويل الأجهزة الطرفية المدعومة من ArduPilot GNSS والبوصلة والمقياس ومستشعر السرعة الجوية والأجهزة الطرفية القائمة على GPIO (PWM، Buzzer/LED) إلى الأجهزة الطرفية لحافلة DroneCAN in Kuwait

لوحة AP_PERIPH CAN Node L431، تحويل الأجهزة الطرفية المدعومة من ArduPilot GNSS والبوصلة والمقياس ومستشعر السرعة الجوية والأجهزة الطرفية القائمة على GPIO (PWM، Buzzer/LED) إلى الأجهزة الطرفية لحافلة DroneCAN

KWD 8.500

الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
1 +

مميزات خاصة

  • CAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware.
  • With this board, you can easily utilize the ArduPilot driver library to convert ArduPilot supported GNSS, Compass, Barometer,Airspeed sensor, and GPIO based (PWM, Buzzer/LED notify) peripherals to DroneCAN bus peripherals.
  • MCU: STM32L431xC, 256KB Flash, CAN transceiver data rates up to 5 Mbit/s in the CAN FD fast phase
  • 1x CAN, DroneCAN Protocol (2x GH-4P connectors in parallel), 3x UARTs, 1x I2C,1x SPI,4x ADC, 5x PWM outputs
  • Input voltage range: 4.5~5.5V @5V pad/pin, Power consumption: 40mA, Package includes: 1x CAN-L431 board, 1x JST-GH-4P to JST-GH-4P 20cm silicon wire, 1x JST-GH-6P to JST-GH-6P 20cm silicon wire

وصف

MCU: STM32L431xC, 256KB Flash
CAN transceiver data rates up to 5 Mbit/s in the CAN FD fast phase
1x CAN, DroneCAN Protocol (2x GH-4P connectors in parallel)
3x UARTs
UART1, spare
UART2, MSP default, DFU
UART3, GPS default
1x I2C for peripheral Airspeed sensor/peripheral Barometer/peripheral Compass QMC5883L
1x SPI for peripheral RM3100
4x ADC (BATT_VOLT, PIN 5, BATT_CURR, PIN 6, BATT2_VOLT, PIN 15, BATT2_CURR, PIN 16)
5x PWM outputs
1x GPIO with TIM16 for buzzer
ST debug, SWCLK & SWDIO
LED definition:
Blue, Fast blinking, Booting
Blue, Slow blinking, working
Red, 3.3V indicator
Input voltage range: 4.5~5.5V @5V pad/pin
Power consumption: 40mA
Operating Temperatures: -20~80 °C

Physical
2x JST-GH-4P(SM04B-GHS-TB) for CAN
1x JST-GH-4P(SM04B-GHS-TB) for I2C
1x JST-GH-6P(SM06B-GHS-TB) for UART3+I2C
Board Size: 26mm*26mm*6mm. 3.7g

Firmware
ArduPilot AP_Periph MatekL431-Periph, or MatekL431-Airspeed
Update via DroneCAN GUI Tool
Package includes:
1x CAN-L431 board
1x JST-GH-4P to JST-GH-4P 20cm silicon wire
1x JST-GH-6P to JST-GH-6P 20cm silicon wire

منتجات شبيهه


{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}