This is a UV sensor, which contains quva-s12sd.It can be widely used for UV index
detection of smart wearable devices, such as watches with UV index detection function smart phones with UV index detection,outdoor UV index detection devices,etc. it can also be used for monitoring UV intensity and UV flame detector during UV line disinfection.
The module is compatible with various MCU control boards,such as Series McuThe module contains 2 interfaces for vou to choose from. One is the anti reverse plug white terminal with a spacing of 2.54mm. When in use, we can use the module's own wire to connect to the single chip microcomputer. In order to facilitate wiring, we also specially designed an expansion board fully compatible with this module. The other is the row pin interface with a spacing of 2.54mm which can be directly connected to the single chip microcomputer by using the male to female DuPont line.
Specification :

Working voltage:DC3.3-5v
Interface:anti reverse interface/needle arrangement interface
Size of locating hole: 3mm in diameter
Conductor length:200mm
Control signal: analog signal
Spectral detection range:240-370nm
Active area:0.076mm2
Response:014a/w
Dark current:1NA
Photocurrent:101~125naUVA lamp,1MW/cm2
Test phenomenon:

In the experimentwe detected the simulated value corresponding to the ultraviolet intensity and displayed it on the display screen

Package : 3PCS