Specification:
Item type: Single Drive Drive Set
Material: plastic
Color: As picture shown
Weight: Approx. 172g
Rated voltage: 24V
Product Category: Pedal Scooter
Remote control battery: built-in lithium battery
Capacity: 400mAh
Applicable people: universal
Current: 8A-12A
Speed: 3000rpm
Induction mode: for Hall
Maximum load capacity: 120kg
Large size of motherboard: Approx. 78x58mm/3.1x2.3in
Small size of motherboard: Approx. 35x20mm/1.4x0.8in
How to connect the remote control and the controller board:
1. Connect the control board to the power supply.
2. Turn on the power of the control board and wait for 2 seconds. Then press and hold the switch for about 6 seconds until the power indicator flashes.
3. Turn on the remote control, and then use a small screwdriver to press the code synchronization switch on the lower left corner of the remote control.
4. Turn off the remote control for two seconds, and then turn it on again. Wait for the remote control light and the switch light to flash simultaneously, indicating that the matching is complet

Package List:
2 x Motherboard
1 x Motor wire
1 x Power supply cable
1 x Remote control
1 x USB cable

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.