Test servos :
Analog voltage signal to PPM signals
PPM signal to Analog voltage signals
PPM signal to PWM signal

Receiver signal to analog voltage signal: CH1
Receiver signal input range: 1000μs - 2000μs / 500μs - 2500μs . (Set by jumper cap).
Analog voltage output range: 0V - 5V.
Conversion characteristics: synchronous conversion with input signal frequency, fast real-time response.

Analog voltage signal to receiver signal: CH2 ,CH3
Receiver signal input range: 1000μs - 2000μs / 500μs - 2500μs . (Set by jumper cap).
Analog voltage input range: 0V - 5V.
Conversion characteristics: two channels full speed synchronous conversion, ultra-low delay response speed.

Note: Two functions are not used at the same time, use one function by jumper cap setting, the other function is disabled.

Features
Operating Voltage :
DC 5V ±（Low jumper position ）;
DC7V to DC15V (High jumper position);
Limit input Voltage:
4.5V(MIN) , 5.5V (MAX) (Low jumper position);
6.0V(MIN) , 15V(MAX)(High jumper position);
Limit output Current : 6.5.a / 7.5a;
Current: ＜10mA；
Weight：7g;
Dimensions:42x31x12mm / 1.65x1.22x0.47 inch(L*W*H)
Application:
Calibration servo signal
Potentiometer or joystick control servo
RC control motor speed controller

Package Included:
1Pcs Multifunction Signal Converter Module