لوحة بناء JUUPINE TK99 لطابعة Bambu Lab X1/X1C/X1E/P1P/P1S ثلاثية الأبعاد، لوحة سطح بناء طابعة ثلاثية الأبعاد، ورقة شبه مرنة، سمك 257X257X1.5 مم، سطح أملس مزدوج الجوانب (لون أبيض)
【Smooth and High Temperature Resistance】TK99 can withstand a high temperature of up to 300 ℃, and its surface is smooth and flat. It will not bend like a spring steel plate from time to time, thus affecting the print quality, and will not cause bubbles like a smooth PEI film or damage the surface when remove prints due to excessive temperature. Due to its high temperature resistance and good viscosity, it can support various types of filament printing, such as TPU, PLA, PETG, ABS, ASA, nylon, polycarbonate, etc.
【Strong adhesion】TK99 build plate has the best adhesion among all the plates we encounter. After countless printing tests, even low viscosity PETG can be easily printed without the need for glue or spraying, just cleaning before printing. After the plate cools down, it can be easily demolded.
【High hardness materials】TK99 is a new type of printing material that can replace smooth PEI films; Using high hardness materials, it can withstand large forces without deformation, insulation, corrosion resistance, wear resistance, impact resistance, scratch resistance, and each piece has undergone edge and chamfering treatment, with smooth edges that do not harm hands.
【Lightweight, 1.5mm thick】Most steel plates on the market have a thickness of 0.5-0.8mm, while TK99 has a thickness of 1.5mm, which means you can print large objects without worrying about the printing area being concave due to weight; Meanwhile, although TK99 is relatively thick, it is lightweight and lighter than glass of the same mass, so it will not cause a significant load on the machine.
【NOTE】The TK99 print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1C/X1/X1E/P1P/P1S, Please confirm your 3D printer platform size before ordering.The TK99 build plate does not have magnetism and needs to be used with 4 clips. If you mind not having magnetism, please do not purchase it. Please refer to the video for specific usage instructions.
وصف
JUUPINE TK99 Build Plate for Bambu Lab X1/X1C/X1E/P1P/P1S 3D Printer, 3D Printer Build Surface Plate Semi-Flexible Sheet,257X257X1.5mm thickness, Double sided Smooth Surface (White Color)
مجموعة لوحة بناء ناعمة للطابعة ثلاثية الأبعاد PEO + PET، منصة فولاذية مرنة لـ K1 Max 310 X315mm، (بدون قاعدة مغناطيسية)
KWD 6
جزء طابعة ثلاثية الأبعاد، شحم تروس، شحم توجيه السكك الحديدية، شحم تشحيم المحور البصري لمختبر بامبو X1 X1C P1P P1S A1 Mini/Kobra 2 Series/Neptune 4/Ender 3 V3 KE/Ender 3 V3/CR10-SE/(4 عبوات)
KWD 3.500
-19%
JUUPINE ترقية 257x257mm H1H لوحة البناء لمختبر Bambu A1 X1 X1C X1E P1P P1S، رقاقة مزدوجة الجوانب + لوح فولاذي زنبركي Galaxy لوحة مرنة لطابعات Bambu Lab ثلاثية الأبعاد
KWD 6.500
مجموعة Kobra 3 Hotend (مثبتة مسبقًا)، مع فوهة فولاذية صلبة إضافية 0.4 مم، فوهة نحاسية، جورب سيليكون، ملحقات طابعة ثلاثية الأبعاد بديلة لرأس الطباعة Anycubic Kobra3 Combo Extruder
KWD 5
