Search

Search

Quick Splice Wire Connectors Snap Kit, Self Stripping Splice Connectors, 100PCS 18-14 AWG Gauge Inline Copper Wire Connector, Blue

KWD 3.500
Brand
Larlansz
Weight
222 g
ColorBlue 100
– 1 +

Special Features

  • Easiest wire connection ever: simply insert wire and crimp/squeeze with pliers. Perfect for simple wiring,These splice connectors are especially handy for tight spaces where its hard to fit wire cutters, strippers, crimpers.
  • They only barely cut into the wire without stripping any of the insulation, so they don't expose much metal/wire,if you spliced the wrong wires together, you can just pop these off and don't have a huge mess to deal with like you would if you had stripped, spliced, and soldered the wires together.
  • Mutable sizes that cover most common wire sizes.22-18 gauge (T-tap female) Red 50PCS; 16-14 Blue 50PCS; and 12-10 gauge Yellow 25PCS .It is good for low voltage.auto, boat, and scooter they work great,Most 12 volt wiring jobs done easy if you need to splice in power /ground/brake etc.
  • For who have no soldering experience and just can't seem to ever get those butt connectors crimped to hold, this is a fantastic alternative. Just place your two wires inside and squeeze down the metal clip which cut through the insulation making contact with both wires to complete the connection, then close cap.
  • These connectors save time with repairs and are easy to install once you get the feel for how much pressure is needed to make the connection.Pushing the middle metal bar to make the circuit.If you want to make them waterproof, add liquid electrical tape or heat shrink wrap and they'll be pretty much permanent at that point.

Description

125pcs Quick Splice Wire Connector
Voltage Level: 300V Max. 75℃
Application: Ideally used in automobile audio equipment, lighting, electrical control, fixtures, control circuits, home appliances, machinery and other electrical connection parts.

Features:
No stripping of the wire is necessary
Quickest & easiest way to splice, split, or tap wires
Non-corroding metal contact blade, durable insulating clam body
Adding a tap to an existing wire without cutting it is easier, safer and quicker

How to Use:
1. Insert the main line into the terminal hole.
2. Insert the branch line into the inner slot.
3. Press the contact sheet tightly with pliers.
4. Lock the protective cover and complete the connection.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}