Material:
10.9 grade 40Cr steel

Compatible Cars:
Fit for Toyota Tundra 2000-2006
Fit for Toyota Sequoia 2001-2007

Replacement Part Number:
Replace 4840934030 4840934020

Solve the Problem:
Car camber problem
Solve tire wear and steering problems

Easy Installation:
Direct replacement without complicated tools

Installation Precautions:
Safety First: Park the vehicle on a flat surface. Lift and secure the vehicle with a jack and safety stand.

Remove the Old Bolts:
Use appropriate tools to remove the old bolts on the lower control arm, remembering their positions.

Clean the Installation Area:
Clean the control arm and bolt holes to ensure there is no dirt or rust.

Install the New Cam Bolts:
Insert the new cam bolts into the holes of the control arm to ensure correct alignment. Use a torque wrench to tighten the bolts as required by the manufacturer.

Preliminary Adjustment:
Perform a preliminary adjustment of the bolts to roughly restore them to their original position.

Professional Calibration:
Go to a professional repair shop for a four-wheel alignment calibration to ensure the correct angle is adjusted.

Inspection and Test Drive:
Check that all bolts are tight, then test drive the vehicle to ensure there are no abnormalities.

Regular Inspection:
Regularly inspect and maintain the cam bolts to ensure they remain in the correct position and are properly tightened.