The Tenere 700 is a great all around bike for both on and off-road riding however most riders find that the windscreen is just not tall enough and are hit with wind buffeting bugs to the visor and excess noise. To alleviate these issues AltRider designed an Adjustable Windscreen Riser for the Tenere 700 with a minimum 10 mm rise over stock at the lowest setting and a 90 mm adjustment range for total 100 mm increase at the highest setting over the stock windscreen. Given the ultimate range of adjustment the AltRider Windscreen riser can eliminate buffeting for a wide range of riders heights. The AltRider Adjustable Windscreen Riser for the Tenere 700 is CNC cut from aircraft grade 6061 aluminum bead blasted and finished in a black anodize. Laser etched AltRider A and T7 logos make for a stylish finishing touch. Knurled thumb nuts make the windscreen easily adjustable using only your fingers. All installation hardware is provided including high quality Viton/FKM washers that are acid oil water UV stable. *Vibra-Tite 213 VC-3 Threadmate Application: Shake well before each use. Apply VC-3 a length of 1 to 1-1/2 times the fastener diameter filling threads 30-50%. Although material will be dry to touch within minutes allow VC-3 to dry for at least 30 minutes (the longer the better) depending on part size. Fasteners are then ready for assembly or to be stored for later use.