Usage:
1- After assembling, put the water inlet of the fish tank water changer into the bathtub (adjust the position, you can fix the bracket to the wall of the fish tank, then fix the tube to the bracket
2- Open the outlet valve and put it into the water container. Note: the water outlet should be lower than the water inlet.
3- Keep squeezing the air bag until the water can flow out automatically. (When the water can flow out automatically there is no need to squeeze the air bag
You can also adjust the position of the water inlet to help you clean the residue at the bottom of the fish tank. It can help you clean your bathtub easily and quickly
Fish tank water changer set contains: a water changer, a squeeze air bag, a hose cleaning brush. The total length of the fish tank water changer is 2.6 meters. The total length of the hose at both ends is 175cm and the inner diameter of the hose is 14mm.
The squeeze airbag has two mouths, one is the water inlet and one is the water outlet, when pressing the airbag, the end with suction is the water inlet. Installation of replacement airbags need to pay attention to prevent the installation of reverse.
The water inlet has a built-in filter to prevent small fish from being sucked out of the tank. It can also prevent some large particles from blocking the outlet pipe when sucking water. The water outlet has a valve, left and right adjustment, which ca n control the size of the water flow very well.
The funnel can be used to salvage small fish, some floating things and dirty things that can't be sucked out from the bottom of the tank. After the water change, you can use the hose cleaning brush to clean the pipe. Easy to use and convenient.
The bracket is used to fix the tube to prevent the tube from slipping out of the tub. Also the bracket can be fixed on the wall of the fish tank. No need to hold the tube by hand all the time. Solve the problem that the tube will slide out of the fish tank.