10S LI-ION BATTERIES. The bms 10s board is for 10 series cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries
35A DISCHARGE CURRENT. Charging connector and discharging connector are separated, discharging current is 35A
STABLE PROTECTIVE FUNCTIONS. Multiple protective functions including overcharge , overdischarge and short circuit
FULLY CHARGED. 10s bms has balance function which would ensure each battery cell being fully charged at same time
PROLONG THE SERVIEC TIME. Help prolong the service time of your battery pack. Before installing the board, the batteries must be matched well. The better the battery consistency is, the farther the running distance is, the best performance of the board is; the battery should be connected in parallel and then in series.Make sure the welding is correct ( battery with spot welding, other batteries with solder welding).
Audio Transformers,10Pcs 600:600 Ohm 1:1 EI14 Isolation Transformer,Double Wire Winding
KWD 3.500
Optocoupler Isolation Board, Dual Channel Input DC 12-32V Analog Voltage Signal Isolation Transmission Module 8.5X3.5X2.8cm
KWD 5.500
Battery Protection Board,10S 36V 30A Cell Battery Protection BMS PCB Board with Balance Function
KWD 14.500
Li-Polymer Battery Pack Protection Board Automatic Activation BMS Module for 13S 48V/54.6V Batteries Silver
KWD 5.500
