بحث

بحث

MMDVM وحدة نقطة الاتصال المزدوجة ذات القبعة المزدوجة مع دعم V1.47 P25 DMR YSF NXDN DMR فتحة 1 + فتحة 2 لـ Raspberry pi (بدون OLED)

KWD 18
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
– 1 +

مميزات خاصة

  • if the board fails to work on duplex mode, please run the upgrade command: sudo pistar-mmdvmhshatflash hs_dual_hat ;
  • WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System Fusion
  • HIGH PERFORMACE: 32-bit ARM processor, up to 10mW RF power, fully tested every piece.
  • EASY OPERATION: The firmware is pre-loaded and is easily upgraded via software. Onboard LEDs showing status (Tx,Rx,PTT,Mode)
  • WORK with RASBERRY Pi: Mounts cleanly on current Raspberry Pi including the Pi Zero , NOT compatible with Rasberry Pi 4. FREQUENCY: UHF 433-900MHz, VHF 144-220 MHz. NOTE: TX =0, RX=0. Modem select: STM32_HS_GPIO

وصف

DESCRIPTION

Original cystal : Original ECS-TXO-3225-147.4-TR from USA
Duplex variant of MMDVM_HS_Hat
This PCB uses the MMDVM_HS .
It has two ADF7021 onboard and allows for duplex operation with two time slots on DMR.

Setting Tips:
Modem select: STM32_HS_GPIO

Package List:
1x MMDVM duplex HotSPOT Module
2x Antenna
2x SMA socket

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}