FACTORY RADIO ADD A SUBWOOFER AMPLIFIER PLUG AND PLAY HARNESS COMPATIBLE WITH FORD EDGE ESCAPE EXPLORER F SERIES MUSTANG TRANSIT CONNECT 2011-2018 DASH PART TYPE ADD-A-CIRCUIT FUSE TAP 3 AMP FUSE
COMPATIBILITY NOTES：
Audio volume to the amplifier can be adjusted by the dials on the harness. For easier access we recommend using an external volume knob.(Not included but we can provide one, see other store listings!)
It is up to the installer to select which circuit to use with the Add-A-Circuit. The radio circuit is most common however any that turns on/off with the ignition could be used if deemed appropriate.
A variety of wire colors may be used for the remote wire coming off the harness. Regardless of color, rest assured it is for the remote turn on of an amplifier.
CONVERTER ADJUSTMENT INSTRUCTIONS:
After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise.
Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 maximum volume.
Select one of the adjustment pots and turn it slowly clockwise until you notice audio distortion and then stop.
Turn the remaining pot to the same position as the previously adjusted pot.