212x104, 2.13inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface
Overview
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
2.13inch e-Paper HAT (B) Features
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
2.13inch e-Paper HAT (B) Specifications
Operating voltage: 3.3V/5V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 65mm × 30.2mm
Display size: 23.71mm × 48.55mm
Dot pitch: 0.229 × 0.228
Resolution: 212 × 104
Display color: red, black, white
Grey level: 2
Full refresh time: 15s
Refresh power: 26.4mW(typ.)
Standby power: ＜0.017mW
Viewing angle: ＞170°
Package Content
2.13inch e-Paper HAT (B) x1
RPi screws pack (2pcs) x1
PH2.0 20cm 8Pin x1
Note:Original from Waveshare, and more resources you may need , please contact us via Amazon message firstly to get.