مميزات خاصة

The Hardened steel nozzles, each of which is molded by five axle CNC.Higher temperature, Higher Wear Resistance, Better Durability.Can be perfectly compatible with special filaments such as PEI, PEEK,carbon,fiber mixture, glass fiber mixture ,and other materiels. (Tolerance 0.01 mm).
Thermal heat break is made from Titanium Alloy to provide excellent thermal isolation between heater and cooling block.Strict quality assurance.No burrs,anti-oxidation and clean surface.(reducing the chance of filament clogging).
The Heatbreak replaced by TC4 material into GRADE5.High quality raw material.High precision production.
The Heatsink and Heater Block Is high quality fine processing aluminum .It is not low quality or cheap aluminum.Coupled with high-precision CNC machining, and strict quality assurance Which brings the high-quality HOTEND Kit.
Compatible with CR-10 max,Cr-10s Pro,and Cr-10s Pro V2,Ender 3 Neo,Ender 3 V2 Neo 3D Printer.

وصف

Recommended slicer setting:
retraction speed over 80MM/S
retraction length 2.5-4MM

If you are facing PLA clogging problem, please try the followings:
1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. G-command "M203 E200"
2. Increase the extruder acceleration. Check your firmware settings. G-command "M201 E9000"
3. Reduce the retraction length. It depends on your machine setup.
4. Increase the nozzle temperature by 5-10 degrees.
5. Do not install the 2 screws for support the heatblock like the stock hotend on the CR-10 printer.
6. Make sure that there is no gap between the heatsink and the heat breaker.

NOTE:
This product only supports 1.75mm filament!!!
We found that many customers do not know how to properly install the nozzle.
Remember the core issues in the installation process.
Just make sure your nozzle and HEAT BREAK front end are tight and sealed. Otherwise, the filament will leak along the screw holes.

Packing list:
MK8 Hardened Steel Nozzle 1.75/0.4mm x 1
Titanium alloy heat break 1.75MM x 1
Aluminum Heater Block x 1
Aluminium CR-10s PRO Heatsink x 1
Silicone socks x 1

مرحبًا،

بحث

طقم فوهة نحاسية

مميزات خاصة

وصف

منتجات شبيهه