IDEALSEAL Compatible Replacement for Top Coated, High performance, low cost labels for use with Zebra, Fargo, Eltron, Datamax, Sato, Intermec, NEX and other direct thermal printers Exceptional print quality, strength, opacity and brightness 3.4 mil face stock with general purpose permanent acrylic emulsion adhesive with aggressive initial tack for excellent adhesion to many substrates including corrugated and glass 1 Inch Core, 4 Inch Outer Diameter with a service temperature range from -75 to 200 degrees Fahrenheit and minimum application temperature of 25 degrees Fahrenheit Wound out labels don't require ribbons are ideal for shipping labels, identification labels, barcode labels and warehouse labels. Top Coated High performance labels for use in desktop bar code printers including Zebra, Fargo, Elton, Datamax, Sato, Intermec and NEX. Exceptional print quality, strength, opacity and brightness. 3.4 mil top coated face stock with permanent acrylic emulsion adhesive with aggressive initial tack for excellent adhesion to many substrates including corrugated and glass. 1 Inch Core, 5 Inch Outer Diameter. Service temperature range from -75 to 200 degrees Fahrenheit. Minimum application temperature is 25 degrees Fahrenheit. Wound out labels are ideal for shipping labels, identification labels, barcode labels and warehouse labels. Extensive shelf life, one year, when stored at 72 degrees Fahrenheit and 50 percent relative humidity.