أداة قطع هوائية 3 بوصات، مطحنة هواء 18000 دورة في الدقيقة، أداة قطع الهواء بمقبض ممتد، أداة قطع بمقبض طويل 11.14 بوصة، سرعة بدون خطوات، سبائك الألومنيوم، قابس هواء 1/4 بوصة
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
Cut Off Tool equipped with a 3” cutting disc featuring a metal shield for enhanced safety and durability, suitable for automobile sheet metal, weld point removal, grinding, and cutting operations
Cut Off Tool features a rotary switch that allows for stepless speed regulation up to 18,000rpm, providing big torque, high power and precise control over cutting applications
Cut Off Tool has an aluminum alloy body of lightweight, designed with a convenient pressure plate type start-stop switch for quick and easy operation
Ergonomically designed extended handle enables easy 360° operation, less vibration, reducing strain during use
Cut Off Tool designed with an air inlet filter screen to effectively filter impurities, and the rear exhaust can direct air away from the working area for improved visibility and comfort
وصف
We recommend
-Before and after daily use, please inject 2-3C.C. of #60 pneumatic lubricating oil (car oil).
-After oiling, operate freely for a few seconds.
-In general, traditional air compressors compress most of the gas containing water vapor, as well as lubricating oil from the compressor piston. If an oil-water separator is not used, water and oil will enter the pneumatic tool with the air, causing the blades to stick. The tool may not start or may not produce enough torque. It is essential to inject pneumatic oil from the rear air inlet and then operate the pneumatic tool idly for a few seconds to restore normal torque.
SPECIFICATION
Max. Idle Speed: 18,000rpm
Air Consumption: 4.0cfm
Air Inlet: 1/4"
Pressure: 90psi
Capacity: 1.2mm
Size: 11.14x3.15x2.40in
N.W.: 1.92 lb.
PACKAGE
-1 x Cut Off Tool
-1 x Air Plug
-1 x Allen Wrench
-1 x Spanner
-1 x Instructions