الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
Applicable Range: A Used with AP, IP camera, IP telephone and the other network equipments in the situation of the lack of power line or far away from the power outlets. A Installed at hotels, schools, buildings,etc. USE PROPERLY: This product is only used for network equipment(just as IP cameras with PoE signal,etc.) with PoE signal function, as relay equipment to achieve signal extension.
FOR THE DEVICE TO ACHIEVE YOUR DESIRED RESULTS, DO NOT CONNECT "input" AND "output" PORT REVERSELY.PoE input-1 RJ45 port, PoE output: 1 RJ45 port; (If you only need 1-Port Input 4-Port Output POE Extender, you may refer to ASIN: B0198H6EUK)Suggest to use this poe extender indoors with waterproof housing.
Network Medium: Cat5 or better UTP cables,less than 120m;Before installing,refer to your product manual guide and the installation guide as the last product image show.
ALL EXTENDERS SELL AFTER PASSING STRICT TEST AS THE 4TH IMAGE SHOW. PoE Extenders can increase the transmission distance for Ethernet data and PoE power up to 120m via Cat5 UTP cables. It offers you great flexibility to extand the distance of PoE;
NOTE: 1. Using high quality transmission cable which can transmit up to 100~120m,if using poor cable that will not reach to 80meters. 2.If the power consumption in front end device is too large, its working voltage may not be enough. 3.Cascading series too much, the voltage will be low, it also may not work. 4.Need to match with Poe switches as the last image.Strictly refer to poe extender Manual Guide to install the equipment,that will perfectly meet with your project requirement .
وصف
1 Port POE IEEE802.3af Ethernet Extender / Repeater for CCTV IP Cameras about 120 meters (max) under standard CAT5 cable
Features:
1). Comply with IEEE 802.af Power over Ethernet;
2). 10/100M Supported;
3). Extender the range of PoE an additional 120 meters;
4). Automatically detects and protects PoE equipments from being damaged by incorrect installation;
5). Plug-and Play no configuration required;
6).1Port PoE extender can forward both ethernet and PoE power for 1 terminal equipment via Cat5 UTP cable.
PoE Extenders can increase the transmission distance for Ethernet data and PoE power up to 120m via Cat5 UTP cables. It offers you great flexibility to extand the distance of PoE.
Other Specification:
Port Description: PoE input-1 RJ45 port, PoE output-1 RJ45 port;
Input Power：13Watts，Output Power：12.2Watts；
Network Medium: Cat5 or better UTP cables (less than 120m);
Repeater Mode: Store and forward;
MAC Address Table: 2K;
Packet Buffer Memory: 48 Byte;
Switching Capacity: 400Mbps;
PoE Standard: IEEE 802.3at (power-in),IEEE 802.3 af(power-out) ;
PoE Power Supply Type:1/2(+),3/6(-),Mode A,End-Span; Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU,Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;
Working Temperature: 0°C~40°C,Working Humidity: 10%~90%,No Condensation,Storage Temperature: -30°C~70°C,Storage Humidity: 5%~90%, No Condensation;
Dimension:75*37*26.5mm.
Note:
To prevent the water seeping into the extender,please keep PoE extender away wet environment.
Package Include:
1x 1-Port 10/100M PoE Extender
![مجموعة مكدس C9200L-STACK-KIT لـ C9200L [محولات مكدس البيانات وكابل واحد] (متجدد) in Kuwait](https://cdn1.tilga.com/md/prod/3/7220/3/174306861.2798.jpg)
