This is a premium quality wick, high brightness, long life replacement projector lamp. installed in your projector, so you appreciate the effect of the original Bulb.

Please Note:
Before purchaseplease make sure that this projector lamp/bulb is compatible with your projector. If you do not find your projector model on the page, contact us to confirm.

About Product:
LBTbate has own factory and many experienced workers.Every lamp will be test before leaving factory. So you don¡¯t need to doubt the quality. and we can solve any after-sales problems and guide the installation.

Installation Step:
1.Turn off the projector and disconnect the power cord.
2.Let the projector cool for at least 30 minutes.
3.Use a screwdriver to remove the screw from the cover.
4.Remove the cover and the lamp protection film.
5.Loose the screws of the lamp.
6.Pull our the lamp module by lifting the handle.
7.Replace the new lamp, then tighten back the screws.
8.Reinstall the lamp cover and reset the lamp usage time.

Tips:
1). Make sure the conditions of the room is clean and ventilation.
2). Change or clean your projector air filter monthly.
3). Better let your projector rest for 15minutes per 4 hours running.
4). Do not unplug the power line before the cooling fan stop working.
Compatible More Models: Fit for V13H010L68 FOR Epson PowerLite Home Cinema 3010 3010E 3020 3020E EH-TW5810C EH-TW5900 EH-TW5910 EH-TW5910W EH-TW6000 EH-TW6000W EH-TW6100 EH-TW6100W H421A H450A TW6510C TW6515C HC3010 HC3010 HC3020 HC3020E Replacement Projector Bulb Lamp With Housing.