الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
Packing List: you will get 1 piece of metal hole saw, 1 piece of hex center shaft, 3 pieces of drill bits, 1 pieces of hexagonal wrench, please keep the drill directly touching the cutting surface at a low speed to get a smooth and clean circular cut
Specific Material: our rock saw for cutting rocks is mainly made of HSS and M42, with higher hardness greater than or equal to 65HRC, high cutting strength and strong wear resistance, it is rustproof and can be reused
Wide Applications: our rock cutting saw can be applied to wood, plywood, plastic, plasterboard, gypsum, sandbag board, acrylic board, thin metal whose thickness is less than 1.25 inches, etc., it can also cut holes for canned lamps or embedded lights, air ducts and more
Detailed Size: the diameter of the opening of the sheet metal hole cutter is about 6 inches/ 150 mm, and its cutting depth is about 1.25 inches/ 32 mm, please pay attention to safety when drilling, it is better to slow down first and then to speed up, wearing safety glasses is important for your eyes
Easy to Install: because the arbor and the recessed lighting hole saw are very close, so there is no need to tighten, you need to aim the locking pin at the hole in the hole saw and tighten it, take out the hexagonal wrench, aim the shorter end at the hole in the connecting rod, rotate counterclockwise, replace it with a bit, and then tighten it with a hexagonal wrench, that's all
وصف
سمات:
احترس:
بسبب الاحتكاك الدوار السريع، قد يسخن منشار الثقب للأضواء المجوفة وينكسر أو حتى يحترق، نوصي باستخدام المبرد (غير متضمن) لإبقائه في درجة حرارة منخفضة.
مجموعة الأدوات العملية:
يمكنك إرسال مجموعة منشار ثقب الضوء المجوف هذه إلى والدك أو صديقك أو جارك أو أي شخص يعمل كعامل، فقد يحتاجون إلى هذه الأداة العملية.
تحديد:
المادة الرئيسية: HSS وM42
اللون الرئيسي: أزرق
مقاس:
قطر الفتحة: حوالي 6 بوصات/150 ملم
عمق الفتحة: حوالي 1.25 بوصة/32 ملم