- Shopping, made easy.
- /
- Get the app!
SparkFun Qwiic Pro Micro - USB-C (ATmega32U4) - Compatible with Arduino development board 5V/16MHz microcontroller AP2112 3.3V Voltage Regulator Castellated PTH pin pads Reset button Maximum 6V input
KWD 9
SparkFun GPS-RTK Board - NEO-M8P-2 (Qwiic) High-Accuracy breakout No Soldering Required Breadboardable Contains a Rechargeable backup battery allowing a Warm-start decreasing time-to-first-fix
KWD 95.500
SparkFun XBee Explorer Dongle - Red
KWD 14.500
SparkFun Teensy 4.1 ARM Cortex-M7 Processor at 600MHz with a NXP iMXRT1062 chip
KWD 20
-18%
SparkFun Qwiic Cable Kit Hook Up I2C Qwiic Development Boards in no time No Soldering Required Includes 10 Different Lengths Styles Breadboardable Polarized 4-pin JST Connector Daisy Chain-able
KWD 4.500
SparkFun Qwiic OpenLog Open-source datalogging Board Works over I2C Supports microSD FAT16/32 cards up to 32GB Configurable baud rates up to 115200bps Preprogrammed ATmega328 with Optiboot bootloader
KWD 8.500
SparkFun Qwiic OLED Display (0.91 in., 128x32)
KWD 4.500
SparkFun Thing Plus - ESP32-S2 WROOM -No Bluetooth- Highly-integrated Feather form-factor development board Equipped w/a 2.4 GHz WiFi System-on-Chip (SoC)- Transparent external flash & RAM encryption
KWD 10
SparkFun Qwiic MultiPort Add I2C ports via Qwiic connectors to boards that only have one I2C port on their I2C bus Alternative daisy chained configuration 2x mounting holes Board size 1 inch by 1 inch
KWD 3
SparkFun FTDI Basic Breakout - 5V Development Tool with USB Mini-B connector
KWD 0
SparkFun Thing Plus - ESP32-S3
KWD 8.500
SparkFun MicroMod ATP Carrier Board-Modular interface ecosystem-Connect microcontroller/processor board to various carrier board peripherals
KWD 8.500
SparkFun Triband GNSS RTK Breakout - UM980 1408-Channel GNSS Receiver, high Precision RTK Position Module, USB Type C, Board Dimensions: 2.0in. x 2.0in. (50.8mm x 50.8mm)
KWD 108
SparkFun WiFi Shield - ESP8266
KWD 11.500
SparkFun ESP32 Qwiic Pro Mini - ESP32-PICO-V3-02 Embedded, Xtensa Dual-core 32-bit LX6 microprocessor, Operating Voltage: 3.0-3.6V, Board Dimensions: 1.5in x 0.70in
KWD 4.500
SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A) - Easily Read Multiple sensors with The Same I2C Address Or Communicate with Multiple I2C Devices with Different addresses - Board only
KWD 5.500
SparkFun Thing Plus - ESP32 WROOM (USB-C) - ESP32-D0WDQ6 Chip Integrated RGB Status LED Operating Voltage: 3.3V Board Dimensions: 2.3in x 1.0in x 0.5in
KWD 10.500
SparkFun MicroMod Input and Display Carrier Board-Modular Interface Ecosystem-Connect microcontroller/Processor Board to Various Carrier Board peripherals-2.4" TFT Display Screen Buzzer
KWD 24.500
SparkFun AST-CAN485 Development Board Allow out-of-the-box interfacing CAN or RS485 network Compatible with Arduino IDE Industrial device interfacing Small foot-print 7-12DCV input Onboard Power
KWD 22
SparkFun Qwiic Compatible with Micro:bit Breakout (with Headers)- Expands The Capabilities Compatible with Micro:bit- Fits Edge Connector- Broken Out 21 GPIO pins to Mail headers- 2X Qwiic Connectors
KWD 4.500
SparkFun RedBoard Artemis Arduino Compatible Microcontroller
KWD 9
SparkFun Thing Plus - ESP32 WROOM (U.FL) - ESP32-D0WDQ6 chip - 16MB Flash Memory - 520kB Internal SRAM - Integrated 802.11 BGN WiFi transceiver
KWD 10.500
SparkFun SAMD21 Dev Breakout 32-bit ARM Cortex-M0+ Processor, 256KB Flash, 32KB SRAM, 600mA 3.3V Regulator.
KWD 12.500
Sparkfun Pocket AVR Programmer
KWD 11
SparkFun LTE CAT M1/NB-IoT Shield - SARA-R4 -Add Data Network Compatible with Arduino or Compatible microcontrollers Wireless High-Bandwidth Cellular functionality Low Power Consumption R3 Footprint
KWD 36
SparkFun Auto pHAT Compatible with Raspberry Pi Google Coral NVIDIA Jetson and More All in One Robotics Package Quickly add functionality to Single-Board Computers Drive 2 Small DC Motors & 4 servos
KWD 16
SparkFun Micro OLED Breakout (with Headers) Screen Size: 64x48 Pixels (0.66" Across) Monochrome Blue-on-Black, SPI or I2C Interface, Pre-soldered headers, Operating Voltage: 3.3V
KWD 5.500
SparkFun GPS-RTK Dead Reckoning pHAT for Raspberry Pi, 3D IMU Sensor, Wheel Ticks, a Vehicle Dynamics Model, Correction Data, and GNSS Measurements. Dimensions: (2.56" x 2.22")
KWD 104.500
SparkFun NanoBeacon Board - IN100, 2.4 GHz Wireless Low-Energy BT Beacon Breakout, Supply Voltage Range: 1.1-3.6V, Dimensions: 1" x 1" (25.4mm x 25.4mm)
KWD 3.500
SparkFun Pro Micro - RP2350 Dual-core microcontroller - Development Platform - Compact Pro Micro Form Factor - Board Dimensions: 1.3in x 0.7in
KWD 6.500
SparkFun GPS Dead Reckoning Breakout - NEO-M8U (Qwiic) - Supports NMEA, UBX, and RTCM protocols Over UART or I2C interfaces Time-to-First fix Cold Start (~26s) Hot Start (~1.5s)
KWD 45.500
