1. Green ABS / Power Sreeing adapter lead ( "Adapter 1" on MultiECUScan website)-Designed to allow access to the ABS and Power Steering systems on supported vehicles. This adapter has a green connector on one end for easy identification.Using this adapter, Pin 7 on the diagnostic tool is connected to Pins 1,7,9 & 12 on the car.

2. Red Airbag adapter lead ( "Adapter 2" on MultiECUScan website)-Designed to allow access to the Airbag system on supported vehicles.This adapter has a red connector on one end for easy identification.Using this adapter, Pin 7 on the diagnostic tool is connected to pin 3 only pn the car.

3. Yellow CAN adapter lead ( "Adapter 3" on MultiECUScan website)-Designed to allow access to the low-speed CAN system on supported vehicles.This adapter has a yellow connector on one end for easy identification.Using this adapter, Pin 6 & 14 on the diagnostic tool are connected to pins 1 & 9Respectively on the car, Pin 7 on the diagnostic tool is connected to pin 12 on the car.

Note:

We only provide hardware (without software). If you need software :, please go to the official website to buy it.

OBD II adapter to specific connector for Italian cars of the FIAT and Alfa-Romeo brands. Cables compatible with the Fiat ECU Scan software (FIATECUSCAN), ELM 327 and KKL VAGCom. It is a set of 3 OBD cables (red, yellow and green) that cover more compatibilities. Green cable for engine, ABS and power steering. Red cable for airbag. Yellow cable for CAN. The OBD 2 connector is a 16-pin female. It is about 3 smallAdapters with 15cm cable that allow to connect a standard OBD II to the specific connector of the vehicle.

SpecificationsAdapter cables OBD II to specific connector for Italian cars of the FIAT and Alfa-Romeo brands. Cables compatible with the Fiat ECU Scan software (FIATECUSCAN), ELM 327 and KKL VAGCom. Set of 3 OBD cables (red, yellow and green) that cover morePatibilities Green cable for engine, ABS and power steering. Red cable for airbag. Yellow cable for CAN. Cables of 10 cm in length based on 16-pin male/female OBD connector. They allow to connect a standard OBD II to the specific connector of the vehicle. .