Product Specification:
Angles: 2 X 45 degree, 2 X 90 degree, 2 X 135 degree.
45 degree: The long side is 1.4inch/3.5cm, The short side is 1inch/2.5cm.
90 degree: The long side is 1.4inch/3.5cm, The short side is 1inch/2.5cm.
135 degree: The long side is 1.6inch/4cm, The short side is 0.9inch/2.2cm.
Feature:
1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage.
2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum.
3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover.
4. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient.
5. The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust.